With the power and performance to outperform the competition, Terex introduces its newest compact track loader models: the PT-100G and PT-100G Forestry. The largest compact track loaders in the Terex® lineup, these new models offer operators a 14.6% increase in tractive effort in low gear for more pushing power, a 32% increase in horsepower to the attachment, a redesigned loader arm to achieve greater reach and 13% more bucket breakout force over their predecessors.
“We continue to enhance our compact track loader lineup based on feedback from our distributors and customers,” says Del Carver, area director, North America Compact, Terex Construction. “The original PT-100 and PT-100 Forestry models are among our best-selling models for construction and utility contractors, landscapers, landowners and vegetation management specialists. Our goal with the new PT-100G models was to keep the attributes that have made the previous machines so popular with our customers, while enhancing features to exceed the market’s expectations.”
These models boast a class-leading 99.9-hp (75 kW) engine and 310 lb-ft (420 Nm) of torque, the most in the CTL industry. Brand new to the PT-100G models, the cooling fan blades will automatically adjust to provide optimum airflow while minimizing engine horsepower consumption. These newest Terex loaders have an operating weight of 11,400 lb (5,171 kg), a tipping load of 8,000 lb (3,629 kg) — with a 4,000 lb (1,814 kg) operating capacity at 50% tipping load capacity — and a lift height of 125 in (3,175 mm).
With a narrow 6-ft profile and a low 14-3/4 in ground clearance, the new Terex® PT-100G and PT-100G Forestry loaders are designed to maximize work in limited access areas. And with a low 4.0 psi ground pressure, these machines can easily work on soft or sensitive surfaces with minimal damage or impact. The new PT-100G models include the Terex® patented Posi-TrackTM undercarriage technology and suspension for the smoothest ride available in the industry. With 48 contact points on the ground, compared to the previous models’ 42, the PT-100G machines offer increased traction and higher flotation in all ground conditions and longer track life. While these loaders come standard with general purpose rubber tracks, the Terex® Turf tracks are options for both these units.“These features offer better operating comfort so operators can make full use of these loaders’ higher travel speeds, hydraulic performance and engine horsepower,” says Carver.
These loaders set a new benchmark in the industry with a load-sensing, high-flow auxiliary hydraulic capability of 43 gal/min (163 lpm) @ 3,800 psi (26200 kPa) [incrementally adjustable in 1 gal (3.8 L) steps from 30-43 gal/min (114-163 lpm)]. Other features standard on the PT-100G and PT-100G Forestry include load-sensing infinitely variable low-flow auxiliary hydraulics from 0-20 gal/min (0-76 lpm), two-speed transmission up to 10 miles/hr (16 k/mh), auto-idle, creep mode, selectable pattern changer from ISO to “H” pattern and adjustable loader/bucket sensitivity. On models equipped with heat or AC, a pressurized and sealed enclosed cab comes standard.
The Terex® PT-100G Forestry compact track loader comes fully outfitted for demanding forestry applications. The auto-reversing fan on the PT-100G Forestry has been enhanced to allow the operator to trigger it at set intervals in 5-min increments to keep the machine’s cooling system running at peak performance. This is the only compact track loader that meets British Columbia logging standards (BC Standard WCB 6G603MAR90 & ISO 8084, April 2008).
In addition to these industry-leading attributes, the rugged new PT-100G Forestry model offers a comprehensive set of integrated standard features, including a FOPS Level 2 cab and 20-in tracks, as well as a complete forestry guarding package that includes a heavy-duty polycarbonate door with a wiper, steel hood, rear brush guard and limb-risers. Also standard is a screened engine pre-cleaner, and heavy duty skid-plates, which are hinged to allow access for cleaning out debris and other routine machine maintenance.
Both the PT-100G and PT-100G Forestry loaders are designed with front-mounted quick-connect hydraulic fittings and an electronic connector for control of attachments, enabling them to use virtually any industry-standard attachment. These models are also equipped with electronic-over-hydraulic pilot-operated joystick controls and a comfortable operator station for easy operation.
“The new PT-100G and PT-100G Forestry machines set a new benchmark for productivity and performance in the large frame CTL class,” says Carver. “These new loaders continue the Terex tradition of excellent performance and reliability derived from building dedicated CTLs from the ground up.”About Terex
Terex Corporation is a diversified global manufacturer operating in four business segments: Terex Aerial Work Platforms, Terex Construction, Terex Cranes, and Terex Materials Processing. Terex manufactures a broad range of equipment for use in various industries, including the construction, infrastructure, quarrying, mining, shipping, transportation, energy, refining, and utility industries. Terex offers a complete line of financial products and services to assist in the acquisition of Terex equipment through Terex Financial Services. More information on Terex can be found at www.terex.com